ENGINEERING | RESEARCH | DEVELOPMENT | TESTING | EVALUATION 
SAFE Inc.
Loading

ARCHIVAL JOURNAL

Arunachalam, Saravanan and Scott A. Fawaz. (2016). “Test method for corrosion pit-to-fatigue crack transition from a corner of hole in 7075-T651 aluminum alloy” International Journal of Fatigue Vol 91, Part 1; pp. 50-58.

Hammond, Matthew, J. and Scott Fawaz. (2016). “Stress intensity factors of various size single edge-cracked tension specimens: A review and new solutions.” Engineering Fracture Mechanics 153; pp. 25-34.

Fawaz, S. A. and D. W. Hill. (2009). “Validation of Stress Intensity Factor Solution for Diametrically Opposed Corner Cracks in a Hole.” International Journal of Fatigue 31; pp. 712-718

Fawaz, S. A. and B. Andersson. (2004). “Accurate Stress Intensity Factor Solutions for Corner Cracks at a Hole.” Engineering Fracture Mechanics 71: 1235-1254.

Fawaz, S. A. (2003). “Equivalent Initial Flaw Size Testing and Analysis of Transport Aircraft Skin Splices.” Fatigue and Fracture of Engineering Materials and Structures 26: 279-290.

de Rijck, J. J. M. and S. A. Fawaz. (2001). “Stress Intensity Factors and Crack Interaction In Adjacent Holes.” Engineering Fracture Mechanics 68: 963-969.

Fawaz, S. A. and J. J. M. de Rijck. (1999). “A Thin Sheet, Combined Tension and Bending Specimen.” Experimental Mechanics 39: 171-176.

Fawaz, S. A. (1999). “Stress Intensity Factor Solutions for Part-Elliptical Through Cracks.” Engineering Fracture Mechanics 63: 209-226.

Fawaz, S. A. (1998). “Application of the Virtual Crack Closure Technique to Calculate Stress Intensity Factors for Through Cracks with an Elliptical Crack Front.” Engineering Fracture Mechanics 59: 327-342.

Fawaz, S. A., Anthony N. Palazotto, and Chyi-Shan Wang (1992). “Axial Tensile and Compressive Properties of High-Performance Polymeric Fibres.” Polymer 33.1: 100-105.

TECHNICAL REPORTS

Saravanan R. Arunachalam, Rausch, Justin R., Fawaz, Scott A. (2017). Mechanical Impact on Corrosion Damage. SAFE Inc.

S.E. Gaylon Dorman, J.W. Rausch, S.R. Arunachalam, J.T. Burns, R.P. Gangloff, and S.A. Fawaz (2016). Managing Environmental Impacts on Time-Cycle Dependent Structural Integrity of High Performance DoD Alloys. SAFE, Inc. 

Mantha, Divakar (2013). Corrosion Pitting Protocol. United States Air Force Academy.

Mantha, Divakar (2013). Spot Welding Protocol. United States Air Force Academy.

Shah, Sandeep R., Molly R. Walters, and Scott A. Fawaz (2008). Stress Corrosion Cracking Rates at Elevated Temperatures for 7079-T6 Thin Sheet Aluminum. United States Air Force Academy.

Shah, Sandeep R., Molly R. Walters, and Scott A. Fawaz (2005). Stress Corrosion Cracking Rates in 7079-T6 Sheet. United States Air Force Academy.

Greer, J. J. M., Daniel Hill, and Scott A. Fawaz (2005). Compression Buckling of Z-Stiffened Aluminum Panels, with and without Corrosion Grindouts, United States Air Force Academy.

Shoales, G. A. and S. A. Fawaz. (2004). Stress Concentration Factor Determination for Various Tensile Test Specimen Configurations by the Finite Element Method using MSC/PATRAN and MSC/NASTRAN, United States Air Force Academy.

Shoales, G. A. and S. A. Fawaz. (2004). E-8/B-707 Wing Station 320 Transition Fit Fastener Finite Element Analysis, United States Air Force Academy.

Brown, Molly, and S. A. Fawaz (2004). Fatigue Performance of Exfoliated E-8C Upper Wing Skin Material, United States Air Force Academy.

Fawaz, S. A. and Jim Harter. (2001). Impact of Parameter Accuracy on Aircraft Structural Integrity Estimates, Air Force Research Laboratory.

Fawaz, S. A. (2000). Equivalent Initial Flaw Size Testing and Analysis, Air Force Research Laboratory.

de Rijck, J. J. M. and S. A. Fawaz. (2000). Stress Intensity Factors and Crack Interaction In Adjacent Holes, Air Force Research Laboratory.

CONFERENCE PROCEEDINGS

Saravanan R. Arunachalam, Richard T. Buckley, and Scott A. Fawaz (2017). Effect of Electro Discharge Machining on the Corrosion Behavior of Aluminum Alloys. 2017 Department of Defense - Allied Nations Technical Corrosion Conference. Birmingham, AL.

Justin Rausch and Scott A. Fawaz (2017). Effect of Environment on the Pit-to-Crack Transition in 7075 Aluminum Alloy. 2017 Department of Defense - Allied Nations Technical Corrosion Conference. Birmingham, AL.

Sarah E. Gaylon Dorman, Saravanan Arunachalam, and Scott A. Fawaz (2017). The Effect of Corrosion Inhibitors on Corrosion Fatigue Damage Under Complex Environmental Conditions. 2017 Department of Defense - Allied Nations Technical Corrosion Conference. Birmingham, AL.

Jason Niebuhr, Saravanan Arunachalam and Scott A. Fawaz (2017). Effects of Atmospheric Environmental Conditions On Fatigue Crack Growth Rates. 2017 Department of Defense - Allied Nations Technical Corrosion Conference. Birmingham, AL.

Sarah E. Galyon Dorman (2017). The Effect of Corrosion Inhibitors on the Corrosion Fatigue of a Legacy Aircraft Aluminum Alloy.  2017 Department of Defense - Allied Nations Technical Corrosion Conference. Birmingham, AL.

Robert G. Kelly, Saravanan Arunachalam, Stephanie L. Kaster, Richard T. Buckley and Scott A. Fawaz (2017). Mechanical Impact of Corrosion Damage. 2017 Department of Defense - Allied Nations Technical Corrosion Conference. Birmingham, AL.

Jason Neibuhr, Saravanan Arunachalam, and Scott Fawaz (2017). Applying the Atmospheric Corrosion Environment to Mechanical Fatigue Testing. The Aircraft Airworthiness & Sustainment Conference. Phoenix, AZ. 

Cindy Klahn, Richard Buckley, and Scott Fawaz (2017). Substantiation Process of Cold Spray Repaired Parts. 2017 Cold Spray Action Team (CSAT) Workshop, Boston, MA.

Sarah E. Galyon-Dorman, Saravanan Arunachalam, and Scott A. Fawaz (2017). Effect of Chromate on Corrosion Fatigue in Service Relevant Concentrations. The 29th Symposium of the International Committee on Aeronautical Fatigue, Nagoya, Japan.

Justin W. Rausch, Sarah E. Galyon-Dorman, and Scott A. Fawaz (2017). Corrosion Fatigue Pit-to-Crack Test MethodologyThe 29th Symposium of the International Committee on Aeronautical Fatigue, Nagoya, Japan.

Saravanan R. Arunachalam and Scott A. Fawaz (2017). Structural Restoration Viability Using Cold Spray Technology. The 29th Symposium of the International Committee on Aeronautical Fatigue, Nagoya, Japan.

Arunachalam, Saravanan and Scott Fawaz (2016). Cold Spray (CS) Repair of Al 7075-T651 Plate for Structural Restoration. 2016 Cold Spray Action Team (CSAT) Workshop, Worcester, MA.

Galyon Dorman, Sarah, Justin Rausch, Arunachalam Saravanan, and S. Fawaz (2016). Examination and Prediction of Corrosion Fatigue Damage and Inhibition. International Workshop on the Environmental Damage in Structural Materials, Cork, Ireland.

Niebuhr, J., S. Galyon Dorman, and S. Fawaz (2016). Effect of Atmospheric Environmental Conditions on Fatigue Crack Growth. International Workshop on the Environmental Damage in Structural Materials, Cork, Ireland.

Arunachalam, Saravanan and Scott Fawaz (2016). Understanding Different Factors Affecting Supersonic Particle Deposition (SPD) repaired Al 7075-T651 Plate for Structural Restoration. International Workshop on the Environmental Damage in Structural Materials, Cork, Ireland.

Gaylon Dorman, Sarah, Scott A. Fawaz (2015). The Effect of Corrosion Inhibitors on the Corrosion Fatigue of Aircraft Aluminum Alloys. Pittsburgh, PA.

Sarah E. Gaylon Dorman, Daniel H. Herring, Sarah E. Collins, Alexander J. Hooks, Benjamin K. Hoff, and Johannes Weinberg (2015). The Effect of Bacteria on Corrosion Fatigue in AA7075. Pittsburgh, PA. 

Galyon Dorman, Sarah, Saravanan Arunachalam, Justin Rausch, Matthew Hammond, and Scott Fawaz (2015). Methodology for Investigation of Corrosion Fatigue Nucleation and Propagation. The 28th Symposium of the International Committee on Aeronautical Fatigue, Helsinki, Finland.

Andersson, Borje and Scott Fawaz (2014). Use of Bending Stress Intensity Factor Solutions for Wide, Thin Plates.  Proceedings of the 2014 AFGROW Users Conference, Layton, UT.

Burns, Jimmy T. and Scott Fawaz (2014).  Environmental Effects on Fatigue Crack Growth. Proceedings of the 2014 AFGROW Users Conference, Layton, UT.

Mantha, Divakar and Scott Fawaz (2014). Standardized Test Method for Corrosion Pit-to-Fatigue Crack Transition in AA7075-T651 Aluminum Alloy.  Proceedings of the 2014 Fatigue Conference, Melbourne, Australia.

Hammond, Matthew J. and Scott Fawaz (2014). Stress Intensity Factor Solutions for Narrow Plates.  Proceedings of the 2014 Fatigue Conference, Melbourne, Australia.

Galyon Dorman, Sarah E. (2014). The Effect of Ralstonia pickettii on Environmental Fatigue Crack Growth of 7xxx Series Aluminum Alloys. Proceedings of the 2014 Fatigue Conference, Melbourne, Australia.

Galyon Dorman, Sarah E. (2014). The Effect of Corrosion Inhibitors on Environmental Fatigue Crack Growth in Al-Zn-Mg-Cu. Proceedings of the 2014 Fatigue Conference, Melbourne, Australia.

Galyon Dorman, Sarah E. (2013). Effect of Chromate Containing Primers on Corrosion Fatigue in Legacy Al-Zn-Mg-Cu Alloys.  Proceedings of the 2013 DoD Corrosion Conference.

Mantha, Divakar, Matthew J. Hammond, and Scott Fawaz (2013). Corrosion Pit to Fatigue Crack Transition Methodology for AA7075-T651 Aluminum Alloy.  Proceedings of the 2013 DoD Corrosion Conference.

Hammond, Matthew J. and Scott Fawaz (2013). Stress Intensity Factors for Finite Width Plates.  Proceedings of the 2013 AFGROW Users Conference, Layton, UT.

Hammond, Matthew and Scott Fawaz (2012). Stress Intensity Factors for Finite Width PlatesProceedings of the 2012 AFGROW Users Conference, Layton, UT.

Hammond, Matthew and Scott Fawaz (2012). Stress Intensity Values for Finite Width Plates. Proceedings of the 2012 Aircraft Airworthiness & Sustainment Conference, Baltimore, MD.

Galyon Dorman, Sarah, Yongwon Lee, Deborah M. Sweeney, Jenifer Warner, Ralph Bush, Scott A. Fawaz (2010). Environmental Fatigue Crack Propagation in AA 7075-T651. Proceedings of the 2010 Aircraft Airworthiness & Sustainment Conference, Austin, TX.

Hammond, Matthew, James Greer, Scott Fawaz, Borje Andersson, Robert Rainsberger, Monica Poelking (2010). Detailed Three-Dimensional Modeling of the C-130 Center Wing Box for Damage Tolerance Analyses. Proceedings of the 2010 Aircraft Airworthiness & Sustainment Conference, Austin, TX.

Arunachalam, Saravanan R., Sandeep R. Shah, Gregory A. Shoales, Scott A. Fawaz (2010). C/KC-135 Teardown Analysis Program, Protocol 8: Failure Analysis, Development and Execution. Proceedings of the 2010 Aircraft Airworthiness & Sustainment Conference, Austin, TX.

Shah, Sandeep R., Gregory A. Shoales, Scott A. Fawaz (2010). C/KC-135 Teardown Analysis Program, Protocol 6: CPC and Lapjoint Evaluation, Development and Execution. Proceedings of the 2010 Aircraft Airworthiness & Sustainment Conference, Austin, TX.

Galyon Dorman, Sarah E., James Greer, Scott Fawaz, Herve Chevalier, Monica Poelking (2010). 3-D Crack Growth and Residual Strength in Titanium. Proceedings of the 2010 Aircraft Airworthiness & Sustainment Conference, Austin, TX.

Andersson, Borje and Scott Fawaz (2009). Solution of Ultra-Large Structural Mechanics Problems during CAP-I 2008 on the IBMPOWER6 System DAVINCI. The 2009 High Performance Computing User Group Conference, San Diego, CA.

Galyon, Sarah E., Saravanan R. Arunachalam, James Greer, Matthew Hammond, and Scott A. Fawaz (2009). Three Dimensional Crack Growth Prediction. The 25th Symposium of the International Committee on Aeronautical Fatigue, Rotterdam, NL.

Shoales, Gregory A. Scott Fawaz, and Molly Walters (2009). Compilation of Damage Findings from Multiple Recent Teardown Analysis Programs. The 25th Symposium of the International Committee on Aeronautical Fatigue, Rotterdam, NL.

Shah, Sandeep, Scott Fawaz, and Molly Walters (2009). On Separating the Effect of Corrosion on Inter-Lamellar Fatigue of Thin Sheet AA7079-T6. The 25th Symposium of the International Committee on Aeronautical Fatigue, Rotterdam, NL.

Fawaz, Scott A. (2009). KC-135 Teardown Program Development. The 11th Joint FAA/NASA/DOD Conference on Aging Aircraft, Kansas City, MO.

Hill, Daniel, and Scott A. Fawaz (2009). Validation of Stress Intensity Factors. The 11th Joint FAA/NASA/DOD Conference on Aging Aircraft, Kansas City, MO.

Galyon, Sarah E., James Greer, Saravanan R. Arunachalam, Matthew Hammond, and Scott Fawaz (2009). 3D Crack Growth and Residual Strength. The 11th Joint FAA/NASA/DOD Conference on Aging Aircraft, Kansas City, MO.

Shah, Sandeep, Scott Fawaz, and Molly Walters (2008). Stress Corrosion Cracking Rates at Elevated Temperatures for 7079-T6 Thin Sheet Aluminum. The 2008 USAF Aircraft Structural Integrity Program Conference, San Antonio, TX.

Shah, Sandeep, Greg Shoales, and Scott Fawaz (2008). Lap Joint Integrity and Corrosion Preventive Compound (CPC) Evaluation using Electrochemical Impedance Spectroscopy (EIS). The 2008 USAF Aircraft Structural Integrity Program Conference, San Antonio, TX.

Fawaz, Scott and Borje Andersson (2008). Fast and Reliable Solution of GDOF-problems on NAVO/BABBAGE and AFRL/HAWK Systems. The 2008 High Performance Computing User Group Conference, Seattle, WA.

Walters, M. R., Sandeep Shah, and S. A. Fawaz (2007). SCC in AA7079-T6 Fuselage Skin Panels. The 9th Joint FAA/NASA/DOD Conference on Aging Aircraft, Palm Springs, CA.

Newman, J. C. Jr., I. S. Raju, and S. A. Fawaz (2007). The Evolution and Application of Three-Dimensional Stress Intensity Factors. The George R. Irviwn Centennial Conference, University of Maryland, College Park, MD.

Fawaz, S. A. (2007). The Effect of Stress Intensity Factor Models on Inspection Intervals. The 2007 USAF Structural Integrity Program Conference, Palm Springs, CA.

Fawaz, S. A. (2007). Using the Worlds Largest Stress Intensity Factor Database for Fatigue Life Predictions. The First International Conference on Damage Tolerance of Aircraft Structures, Delft, The Netherlands.

de Rijck, J. J. M., S. Fawaz, J. Schijve, R. Benedictus, and J. J. Homan (2007). Stress Analyses of Mechanically Fastened Joints in Aircraft Fuselages. The 24th Symposium of the International Committee on Aeronautical Fatigue, Naples, IT.

Andersson, B. and S. A. Fawaz. (2007). Statistical Fatigue and Residual Strength Analysis of New/Aging Aircraft Structure. The 2007 High Performance Computing User Group Conference, Pittsburgh, PA.

Andersson, B. and S. A. Fawaz. (2006). Statistical Fatigue and Residual Strength Analysis of New/Aging Aircraft Structure. The 2006 High Performance Computing User Group Conference, Denver, CO.

Verhoeven, S., C. Guijt, and S. Fawaz (2005). Bonded Repair of Exfoliation Corrosion. The 8th Joint DOD/FAA/NASA Conference on Aging Aircraft, Palm Springs.

Shiao, M., Kevin Boyd, and S. A, Fawaz (2005). A Risk Assessment Methodology and Tool for Probabilistic Damage Tolerance-Based Maintenance Planning. The 8th Joint DOD/FAA/NASA Conference on Aging Aircraft, Palm Springs, CA.

Guijt, C., Daniel Hill, Justin Rausch, and Scott Fawaz (2005). The Effect of Dents in Fuselage Structures on Fatigue and Static Stability. The 23rd Symposium of the International Committee on Aeronautical Fatigue, Hamburg, GE, EMAS.

Greer, J. J. M., M. Brown, R. Bush, S. Fawaz, C. Guijt (2005). Fatigue and Residual Strength Effects of Exfoliation Corrosion Damage. The 8th Joint DOD/FAA/NASA Conference on Aging Aircraft, Palm Springs, CA.

Andersson, B. and S. A. Fawaz. (2004). Statistical Fatigue and Residual Strength Analysis of New/Aging Aircraft Structures. High Performance Computing User Group Conference, Williamsburg, VA.

Fawaz, S. A., B. Andersson, J. C. Newman, Jr. (2003). Experimental Verification of Stress Intensity Factor Solutions for Corner Cracks at a Hole Subject to General Loading.Proceedings of the 22nd Symposium of the International Committee on Aeronautical Fatigue, Lucerne, EMAS.

de Rijck, J. J. M. and S. A. Fawaz. (2003). Stress Intensity Factor Solutions for Countersunk Holes Subjected to Combined Loading. The 7th Joint DOD/FAA/NASA Conference on Aging Aircraft, New Orleans, LA.

de Rijck, J. J. M. and S. A. Fawaz. (2003). Stress Analysis of Mechanically Fastened Joints and Stress Intensity Factor Solutions for Countersunk Holes under General Loading. The 22nd Symposium of the International Committee on Aeronautical Fatigue, Lucerne, Switzerland, EMAS.

Ingram, J. E., Y. S. Kwon, and S. A. Fawaz (2002). 3D Finite Element Modeling of MSD-Cracked Structural Joints. The 6th Joint DOD/FAA/NASA Conference on Aging Aircraft, San Francisco, CA.

de Rijck, J. J. M. and S. A. Fawaz. (2002). Stress Intensity Factors Solutions for Countersunk Holes Subjected to Tension, Bending and Pin Loading. The 6th Joint DOD/FAA/NASA Conference on Aging Aircraft, San Francisco, CA.

Ingram, J. E., Y. S. Kwon, and S. A. Fawaz (2001). 3D Finite Element Modeling of Aircraft Structural Joints with Multiple Site Damage. The 8th International Fatigue Conference, Stockholm, Sweden.

Fawaz, S. A. and B. Andersson. (2000). Accurate Stress Intensity Factor Solutions for Unsymmetric Corner Cracks at a Hole. Proceedings of the Fourth Joint DOD/FAA/NASA Conference on Aging Aircraft, St. Louis, MO.

de Rijck, J. J. M. and S. A. Fawaz. (2000). A Simplified Approach for Stress Analysis of Mechanically Fastened Joints (TextFigures). 4th Joint DOD/FAA/NASA Conference on Aging Aircraft, St. Louis, MO.

Fawaz, S. A., J. Lo, and C. Hsu (1999). Equivalent Initial Flaw Size Distribution in Fuselage Skin Splices. The Seventh International Fatigue Congress, Beijing, P.R. China.

de Rijck, R., S. A. Fawaz, J. Schijve, and A. Vlot (1999). Stress Intensity Factors and Crack Interaction of Part-Elliptical Through Cracks in Adjacent Holes (TextFigures). 20th Symposium of the International Committee on Aeronautical Fatigue, Bellevue, WA, EPIC.

Fawaz, S. A. and J. Schijve. (1998). Fatigue Crack Growth Predictions in Riveted Joints. 2nd Joint NASA/FAA/DOD Conference on Aging Aircraft, Williamsburg, VA.

Fawaz, S. A., J. Schijve, and A. U. de Koning (1997). Fatigue Crack Growth in Riveted Lap Splice Joints. 19th Symposium of the International Committee on Aeronautical fatigue, Edinburgh, Scotland, EMAS/SoMat Systems International Ltd.

Fawaz, S. A. (1997). Application of the Gel Electrode Method in Thin Sheet Fatigue Specimens. Delft, Delft University of Technology.

Fawaz, S. A. (1996). Application of the Virtual Crack Closure Technique to Calculate Stress Intensity Factors for Through Cracks with an Oblique Elliptical Crack Front. Delft, Delft University of Technology.

Fawaz, S. A. and J. Schijve. (1995). Crack Growth in Riveted Lap Joints. USAF Structural Integrity Program Conference, San Antonio, TX.

Fawaz, S. A. and J. Schijve. (1994). Multiple Site Damage (MSD) in a Pressurized Fuselage Riveted Lap Joint. USAF Structural Integrity Program Conference, San Antonio, TX.